Welcome to 3D Arts (a 3D Printing Co.)

CTC Dual Extruder 3D Printer prevent hitting extruder to wall

  • Model: hitting CTC extruder to wall
  • 0 Units in Stock

 Sold Out 

You will have to modify the start G-code to prevent hitting the extruder against the frame of the CTC 3D Printer Something like this:

; Replicator 1 dual start.gcode 
M73 P0 ; enable build progress
G162 X Y F3000 ; home XY maximum
G161 Z F1200 ; home Z minimum
G92 Z-5 ; set Z to -5
G1 Z0 ; move Z to 0
G161 Z F100 ; home Z slowly
M132 X Y Z A B ; recall home offsets
M135 T0 ; load right extruder offsets
G1 X120 Y0 Z30 F9000 ; move to wait position off table
G130 X20 Y20 Z20 A20 B20 ; lower stepper Vrefs while heating
M126 S[fan_speed_pwm]
M140 S[bed0_temperature] T0
M134 T0 ; stabilize bed temperature
M104 S[extruder1_temperature] T1
M133 T1 ; stabilize extruder temperature
G130 X127 Y127 Z40 A127 B127 ; default stepper Vrefs
G92 A0 B0 ; zero extruders
M135 T1 ; load left extruder offsets
G1 Z0.4 ; position nozzle
G1 E25 F300 ; purge nozzle
G1 X120 Y0 Z0.15 F1200 ; slow wipe
G1 X120 Y0 Z0.5 F1200 ; lift
G92 A0 B0 ; zero extruders
M73 P1 ;@body (notify GPX body has started)
; end of start.gcode

3D Arts Inc. Copyright © 2015 - 2016 All Rights Reserved


This product was added to our catalog on Friday 21 August, 2015.

Important Links

Sponsors

Happy Holidays, Happy New year 2016

3d Printing - training - courses

Have you seen ...

Power Supplies and ac adpaters

Who's Online

There currently are 3 guests online.
Your IP Address is: 54.81.94.117
Copyright © 2017 3D Arts. Powered by Zen Cart
3D Arts